pubbanner.jpg

Publications by Year

* indicates Atamturktur's graduate students

** indicates other graduate students

2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011

2010 - Prior to 2010


2018

Martinez M., Huygenb N., Sandersc J., and Atamturktur S. (2018), "Thermo-Fluid Dynamic Analysis of Concrete Masonry Units via Experimental Testing and Numerical Modeling," Journal of Building Engineering, (In-Press).

Martinez M., Atamturktur S., Ross B., and Thompson J. (2018), "Assessing the Compressive Behavior of Dry-Stacked Concrete Masonry with Experimentally Informed Numerical Models," Journal of Structural Engineering (ASCE), Vol. 144, No. 7.

Brown A. and Atamturktur S. (2018), “Nonparametric Functional Calibration of Computer Models,” Statistica Sinica (Institute of Statistical Science), Vol. 28, No. 2, pp. 721-742.

Yazdekhasti S., Piratla K. R., Matthews J.C., Khan A., and Atamturktur S., (2018), "Optimal Selection of Acoustic Leak Detection Techniques for Water Pipelines Using Multi-Criteria Decision Analysis," Management of Environmental Quality: An International Journal (Emerald), Vol. 29, No. 2, pp. 255-277. DOI: 10.1108/MEQ-05-2017-0043. 


2017

Atamturktur S., Ross B., Thompson J., and Biggs D. (2017), “Compressive Strength of Dry-Stacked Concrete Masonry Unit Assemblies,” Journal of Materials in Civil Engineering, Vol. 29, No. 2. 

Bi S.**, Prabhu S.*, Cogan S., and Atamturktur S. (2017), “Uncertainty Quantification Metrics with Varying Statistical Information in Model Calibration and Validation,” AIAA Journal, Vol. 55, No. 10, pp. 3570-3583. 

Hu X.*, Prabhu S.*, Atamturktur S., and Cogan, S. (2017), “Mechanistically-Informed Damage Detection Using Dynamic Measurements: Extended Constitutive Relation Error,” Mechanical Systems and Signal Processing, Vol. 85, pp. 312-328. 

Prabhu S.* and Atamturktur S. (2017), “Assessment of Strength Degradation of Historic Masonry Monuments Due to Damage: Load Path-based Approach,” Journal of Structural Engineering (ASCE), Vol. 143, No. 9. 

Prabhu S.*, Atamturktur S., and Cogan S. (2017), "Model assessment in scientific computing: Considering robustness to uncertainty in input parameters,” Engineering Computations: International Journal for Computer-Aided Engineering and Software (Emerald), Vol. 34, No. 5, pp. 1700-1723. 

Stevens G.*and Atamturktur S., (2017), "Mitigating Error and Uncertainty in Partitioned Analysis: A Review of Verification, Calibration and Validation Methods for Coupled Simulations," Archives of Computational Methods in Engineering, Vol. 24, No. 3, pp. 557-571. 

Yazdekhasti S., Piratla K. R., Atamturktur S., and Khan A. (2017), “Experimental Evaluation of a Vibration-Based Leak-Detection Technique for Water Pipelines,” Structure and Infrastructure Engineering (Taylor & Francis), Vol. 14, No. 1, pp. 46-55. DOI: 10.1080/15732479.2017.1327544. 


2016

Khan S. M., Atamturktur S., Chowdhury M., and Rahman, M. (2016), "Integration of structural health monitoring and intelligent transportation systems for bridge condition assessment: current status and future direction." IEEE Transactions on Intelligent Transportation Systems, Vol. 17, No. 8, pp. 2107-2122. 

Lu J.*, Atamturktur S., and Huang Y. (2016), "Bi-level Resource Allocation Framework for Retrofitting Bridges in a Transportation Network," Transportation Research Record: Journal of the Transportation Research Board, Vol. 2550, pp. 31-37. 

Sevim B., Atamturktur S., Altunisik A. C., and Bayraktar A. (2016), “Ambient Vibration Testing and Seismic Behavior of Historical Arch Bridges under Near and Far Fault Ground Motions,” Bulletin of Earthquake Engineering (Springer), Vol. 14, No. 1, pp. 241-259. 

Stevens G.*, Atamturktur S., Lebensohn R., and Kaschner G. (2016), "Experiment-Based Validation and Uncertainty Quantification of Coupled Multi-scale Plasticity Models," Multidiscipline Modeling in Materials and Structures (Emerald), Vol. 12, No. 1, pp. 151-176. 

Yazdekhasti S.*, Piratla K. R., Atamturktur S. and Khan A. (2016), "Experimental Verification of a Novel Vibration-Based Technique for Detecting Water Pipeline Leakage," Journal of Structure and Infrastructure Engineering (Taylor and Francis), Vol. 14, No. 1, pp. 46-55. 


2015

Atamturktur S., Egeberg M.*, Stevens G.*, and Hemez F. (2015), "Defining Coverage of an Operational Domain using a Modified Nearest-Neighbor Metric," Mechanical Systems and Signal Processing (Elsevier), Vol. 50-51, pp. 349-361. 

Atamturktur S. and Farajpour I.* (2015), “Resource Allocation for Code Development in Partitioned Models,” Engineering Computations: International Journal for Computer-Aided Engineering and Software (Emerald), Vol. 32, No. 7, pp. 1981-2004. 

Atamturktur S., Farajpour I.*, Prabhu S.* and Haydock A.* (2015), “Adaptively Weighted Support Vector Regression: Prognostic Application to a Historic Masonry Fort,” Journal of Performance of Constructed Facilities (ASCE), Vol. 29, No. 2. 

Atamturktur S., Hegenderfer J.*, Williams B., Egeberg M.*, Lebensohn R., and Unal C. (2015), “A Resource Allocation Framework for Experiment-Based Validation of Numerical Models,” Journal of Mechanics of Advanced Materials and Structures (Taylor & Francis), Vol. 22, No. 8, pp. 641-654. 

Atamturktur S., Hegenderfer J.*, Williams B., and Unal C. (2015), “Selection Criterion Based on an Exploration-Exploitation Approach for Optimal Design of Experiments,” Journal of Engineering Mechanics (ASCE), Vol. 141, No. 1. 

Atamturktur S., Liu Z.*, Cogan S., and Juang C. H. (2015), “Calibration of Imprecise and Inaccurate Numerical Models Considering Fidelity and Robustness: A Multi-Objective Optimization-Based Approach,” Structural and Multi-Disciplinary Optimization (Springer), Vol. 51, No. 3, pp. 659-671. 

Gong W.*, Huang H., Juang C. H., Atamturktur S., and Brownlow A.** (2015), “Improved Shield Tunnel Design Methodology Incorporating Design Robustness,” Canadian Geotechnical Journal, Vol. 52, No. 10, pp. 1575-1591. 

Khoshnevisan S.**, Gong W.*, Juang C.H., and Atamturktur S. (2015), “Efficient Robust Geotechnical Design of Drilled Shafts in Clay Using a Spreadsheet,” Journal of Geotechnical and Geoenvironmental Engineering (ASCE), Vol. 141, No. 2.  

Prabhu P.* and Atamturktur S. (2015), “A Review on Prognostic Evaluation of Historic Masonry Structures: Present Challenges and Future Direction,” The Masonry Society Journal, Vol. 33, No. 1, pp. 1-12.

Ross B., Roper B.*, and Atamturktur S. (2015), “Detailing Steel Roof Decks to Control Damage from Wind-borne Debris Impact,” Practice Periodical on Structural Design and Construction (ASCE), Vol. 21, No. 1 pp. 1-8. 

Stevens G.*, Van Buren K.*, Wheeler E.*, and Atamturktur S. (2015), “Evaluating the Fidelity and Robustness of Calibrated Numerical Model Predictions: An Application on a Wind Turbine Blade,” Engineering Computations: International Journal for Computer-Aided Engineering and Software (Emerald), Vol. 32, No. 3, pp. 621-642. 


2014

Deng Z., Bi S.*, and Atamturktur S., (2014), “Stochastic Model Updating using Distance Discrimination Analysis,” Chinese Journal of Aeronautics (Elsevier), Vol. 27, No. 5, pp. 1188-1198. 

Farajpour I.* and Atamturktur S. (2014), “Partitioned Analysis of Coupled Numerical Models Considering Imprecise Parameters and Inexact Models,” Journal of Computing in Civil Engineering (ASCE), Vol. 28, No. 1, pp., 145–155. 

Juang C.H., Wang L.*, Hsieh H. S., and Atamturktur S. (2014), “Robust Geotechnical Design of Braced Excavations in Clays,” Structural Safety (Elsevier), Vol. 49, pp. 37-44. 

Li T.* and Atamturktur S. (2014), “Fidelity and Robustness of Detailed Micromodeling, Simplified Micromodeling and Macromodeling Techniques for a Masonry Dome,” Journal of Performance of Constructed Facilities (ASCE), Vol. 28, No. 3, pp. 480-490. 

Liu Z.*, Atamturktur S., and Juang C. H. (2014), “Reliability Based Multi-Objective Robust Design Optimization of Steel Moment Resisting Frame Considering Spatial Variability of Connection Parameters,” Engineering Structures (Elsevier), Vol. 76, pp. 393-403. 

Prabhu S.*, Atamturktur S., Brosnan D., Messier P., and Dorrance R., (2014), “Foundation Settlement Analysis of Fort Sumter National Monument: Model Development and Predictive Assessment,” Engineering Structures (Elsevier), Vol. 65, pp. 1-12. 

Van Buren K.*, Atamturktur S., and Hemez F. (2014), “Model Selection through Robustness and Fidelity Criteria: Modeling the Dynamics of the CX-100 Wind Turbine Blade,” Journal of Mechanical Systems and Signal Processing (Elsevier), Vol. 43, No. 1-2, pp. 246-259. 

Wang L.*, Juang C.H., Atamturktur S., Gong W.*, Khoshnevisan S.*, and Hsieh H. S. (2014), “Optimization of Design of Supported Excavations in Multi-layer Strata,” Journal of GeoEngineering (TGS), Vol. 9, No. 1, pp. 1-12. 


2013

Atamturktur S., Gilligan C.*, and Salyards K. (2013), “Detection of Internal Defects in Concrete Members using Global Vibration Characteristics,” Materials Journal (ACI), Vol. 110, No. 5, pp. 529-538. 

Atamturktur S. and Prabhu S.* (2013), “Simulation Based Structural Analysis of Fort Sumter Considering Foundation Settlement,” Structures Magazine, May, pp. 26-29. 

Atamturktur S., Williams B., Egeberg M.*, and Unal C. (2013), “Batch Sequential Design of Optimal Experiments for Improved Predictive Maturity in Physics-Based Modeling,” Structural and Multidisciplinary Optimization (Springer), Vol. 48, No. 3, pp. 549-569. 

Dalton S.*, Atamturktur S., Farajpour I.*, and Juang C.H. (2013), “An Optimization Based Approach for Structural Design Considering Safety, Robustness, and Cost,” Journal of Engineering Structures (Elsevier). Vol 57, pp. 356-363. 

Dalton S.*, Atamturktur S., and Juang C.H. (2013), “Structural Health Monitoring for Sustainable and Resilient Infrastructure Management,” International Journal of Building, Urban, Interior and Landscape Technology, Vol. 2, pp. 56-67. 

Farajpour I.* and Atamturktur S. (2013), “Error and Uncertainty Analysis of Inexact and Imprecise Computer Models,” Journal of Computing in Civil Engineering (ASCE), Vol. 27, No. 4, pp. 407-418. 

Fisher M.*, Atamturktur S., and Khan A. (2013), “A Novel Vibration-Based Monitoring Technique for Bridge Pier and Abutment Scour,” Journal of Structural Health Monitoring (Sage), Vol. 12, No. 2, pp. 114-125. 

Fisher M.*, Chowdhurry Md. N.*, Khan A., and Atamturktur S. (2013), “An Evaluation of Scour Measurement Devices,” Flow Measurement and Instrumentation (Elsevier), Vol. 33, pp. 55-67. 

Fisher M.*, Khan A., and Atamturktur S. (2013), "State of the Art in Scour Monitoring," Sediment Transport: Monitoring, Modeling and Management, Editors: Khan A. A. and Wu W., Nova Science Publishers, Inc., ISBN: 978-1-62618-683-5.

Fisher M.*, Khan A., and Atamturktur S. (2013), “Scour Monitoring via Turbulent Open Channel Flow,” Measurement Science and Technology (IOP Science), Vol. 24, No. 8, pp. 1-14. 

Hegenderfer J.* and Atamturktur S. (2013), “Prioritization of Code Development Efforts in Partitioned Analysis,” Computer-Aided Civil and Infrastructure Engineering (Wiley), Vol. 28, No. 4, pp. 289-306. 

Juang C.H., Liu Z.*, and Atamturktur S. (2013), “Reliability-Based Robust Geotechnical Design of Retaining Walls,” Sound Geotechnical Research to Practice, ASCE Geotechnical Special Publication (ASCE), pp. 514-524. 

Liu Z.*, Atamturktur S., and Juang H. (2013), “Performance Based Robust Design Optimization of Steel Moment Resisting Frames,” Journal of Constructional Steel Research (Elsevier), Vol. 89, pp. 165-174. 

Liu Z.*, Juang H., and Atamturktur S. (2013), “Confidence Level-Based Robust Design of Cantilever Retaining Walls in Sand,” Computers and Geotechnics (Elsevier), Vol. 52, pp. 16-27. 

Luo Z.*, Atamturktur S., and Juang C.H. (2013), “Bootstrapping for Characterizing the Effect of Uncertainty in Sample Statistics for Braced Excavations,” Journal of Geotechnical and Geoenvironmental Engineering (ASCE), Vol. 139, No. 1, pp. 13-23. 

Prabhu S.* and Atamturktur S. (2013), “Selection of Optimal Sensor Locations Based on Modified Effective Independence Method: Case Study on a Gothic Revival Cathedral,” Journal of Architectural Engineering (ASCE), Vol. 19, No. 4, pp. 288-301. 

Prabhu S.* and Atamturktur S. (2013), “Feature Assimilation for Vibration Based Damage Detection,” Journal of Testing and Evaluation (ASTM), Vol. 41, No. 1, pp. 39-49. 

Van Buren K.*, Mollineaux M.**, Hemez F., and Atamturktur S. (2013), “Simulating the Dynamics of Wind Turbine Blades: Part II, Model Validation & Uncertainty Quantification,” Wind Energy (Wiley), Vol. 16, No. 5, pp. 741-758. 

Wang L.*, Hwang J. H., Juang C. H., and Atamturktur S. (2013), “Reliability-Based Design of Rock Slopes – A New Perspective on Design Robustness,” Engineering Geology (Elsevier), Vol. 154, pp. 56-63. 


2012

Atamturktur S., Hemez F., and Laman J. (2012), "Uncertainty Quantification in Model Verification and Validation as Applied to Large Scale Historic Masonry Monuments," Engineering Structures (Elsevier), Vol. 43, pp. 221-234. 

Atamturktur S. and Laman J. (2012), "Finite Element Model Correlation and Calibration of Historic Masonry Monuments: Review," Journal of Structural Design of Tall and Special Buildings (Wiley), Vol. 21, No. 2, pp. 96-113. 

Atamturktur S., Li T.*, Ramage M., and Farajpour I.* (2012), “Load Carrying Capacity Assessment of a Scaled Masonry Dome: Simulations Validated with Non-Destructive and Destructive Measurements,” Construction and Building Materials (Elsevier), Vol. 34, pp. 418-429. 

Atamturktur S. and Sevim B. (2012), “Seismic Performance Assessment of Masonry Tile Domes through Nonlinear Finite-Element Analysis,” Journal of Performance of Constructed (ASCE), Vol. 26, No. 4, pp. 410-423. 

Farajpour I.* and Atamturktur S. (2012), “Optimization-Based Strong Coupling Procedure for Partitioned Analysis.” Journal of Computing in Civil Engineering (ASCE), Vol. 26, No. 5, pp. 648-660. 

Juang C. H., Luo Z.*, Atamturktur S., and Huang H. (2012), “Bayesian Updating of Soil Parameters for Braced Excavations Using Field Observations,” Journal of Geotechnical and Geoenvironmental Engineering (ASCE), Vol. 139, No. 3, pp. 395-406. 

Juang H., Wang L.*, Atamturktur S., and Luo Z. (2012), “Reliability-Based Robust and Optimal Design of Shallow Foundations in Cohesionless Soil in the Face of Uncertainty,” Journal of GeoEngineering (TGS), Vol. 7, No. 3, pp. 75-87. 

Luo Z.*, Atamturktur S., Cai Y., and Juang C. H. (2012), “Simplified Approach for Reliability-Based Design Against Basal-Heave Failure in A Braced Excavation in Clay,” Journal of Geotechnical and Geoenvironmental Engineering (ASCE), Vol. 138, No.4, pp. 441-450. 

Luo Z.*, Atamturktur S., Cai Y., and Juang C. H. (2012), “Reliability Analysis of Basal-Heave in a Braced Excavation in a 2-D Random Field,” Computers and Geotechnics (Elsevier), Vol. 39, pp. 27-37. 

Luo Z.*, Atamturktur S., and Juang C.H. (2012), “Effect of Spatial Variability on Probability-Based Design of Excavations Against Basal-Heave,” Geotechnical Special Publication (ASCE), No. 225, pp. 2876-2884. 

Mollineaux M.**, Van Buren K.*, Hemez F., and Atamturktur S. (2012), “Simulating the Dynamics of Wind Turbine Blades: Part I, Model Development and Verification,” Wind Energy (Wiley), Vol. 16, No. 5, pp. 694-710. 

Van Buren K.* and Atamturktur S. (2012), “A Comparative Study: Predictive Modeling of Wind Turbine Blades,” Wind Engineering, Vol. 36, No. 3, pp. 235-250. 


2011

Atamturktur S., Bornn L., and Hemez F. (2011), "Vibration Characteristics of Vaulted Masonry Monuments Undergoing Differential Support Settlement," Engineering Structures (Elsevier), Vol. 33, No. 9, pp. 2472-2484. 

Atamturktur S., Hemez F., Williams B., Tome C., and Unal C. (2011), “A Forecasting Metric for Predictive Modeling,” Computers and Structures (Elsevier), Vol. 89, No. 23-24, pp. 2377-2387. 

Hemez F. and Atamturktur S. (2011), “The Dangers of Sparse Sampling for the Quantification of Margin and Uncertainty,” Reliability Engineering & System Safety (Elsevier), Vol. 96, No. 9, pp. 1220-1231. 

Luo Z.*, Atamturktur S., Juang C. H., and Lin P. S. (2011), “Probability of Serviceability Failure in a Braced Excavation in a Spatially Random Field: Fuzzy Finite Element Approach,” Computers and Geotechnics (Elsevier), Vol. 38, No. 8, pp. 1031-1040. 

Sevim B., Bayraktar A., Altunişik A. C., Atamturktur S., and Birinci F. (2011), “Finite Element Model Calibration Effects on the Earthquake Response of Masonry Arch Bridges,” Finite Elements in Analysis and Design (Elsevier), Vol. 47, No. 7, pp. 621-634. 

Sevim B., Bayraktar A., Altunişik A. C., Atamturktur S., and Birinci F. (2011), “Assessment of Nonlinear Seismic Performance of a Restored Historical Arch Bridge using Ambient Vibrations,” Nonlinear Dynamics (Springer), Vol. 63, No. 4, pp. 755-770. 

Unal C., Williams B., Hemez F., Atamturktur S., and McClure P. (2011), “Improved Best Estimate Plus Uncertainty Methodology, Including Advanced Validation Concepts, to License Evolving Nuclear Reactors,” Nuclear Engineering and Design (Elsevier), No. 241, No. 5, pp. 1813-1833. 


2010

Atamturktur S. and Boothby T. (2010), “Stochastic Bayesian Calibration of Finite Element Models of Masonry Vaults,” The Masonry Society Journal (TMS), Vol. 28, No. 2, pp. 77-93.

Atamturktur S., Hemez F.M., and Unal C. (2010), “Calibration under Uncertainty for Finite Element Models of Masonry,” Los Alamos Technical Report, LA-14414. 

Hemez F., Atamturktur S., and Unal C. (2010), “Defining Predictive Maturity for Validated Numerical Models,” Computers and Structures (Elsevier), Vol. 88, No. 7-8, pp. 497-505. 


Prior to 2010

Atamturktur S., Pavic A., Reynolds P., and Boothby T. (2009), “Full-Scale Modal Testing of Vaulted Gothic Churches: Lessons Learned,” Experimental Techniques (Wiley), Vol. 33, No. 4, pp. 65-74. 

Atamturktur S. and Boothby T. (2007), “The Development of Finite Element Models and the Horizontal Thrust of Guastavino Domes,” The Journal of Preservation Technology (The Association for Preservation Technology International), Vol. 38, No. 4, pp. 21-29.